Anyone care to post pics of their crossbows and gear

Discussion in 'General Crossbow Discussion' started by davenj8, Feb 22, 2015.

  1. davenj8

    davenj8 Member

    Not sure if it's been done here in a while or ever but I woul love to see some nice pics of crossbows and accessories. A little bow voyerism so to speakl
     
  2. Brubaker

    Brubaker Member

  3. jake

    jake Member

  4. Long Gone

    Long Gone Active Member

    Here's a few of my E/M/N 335 and GamePlanGear (CrossOver)... :)

    012.jpg

    013.jpg
     
  5. bbahunter

    bbahunter Active Member

  6. bbahunter

    bbahunter Active Member

    Micro ImageUploadedByTapatalk1424658123.996882.jpg ImageUploadedByTapatalk1424658137.191770.jpg


    Sent from my iPhone using Tapatalk
     
  7. jacol84

    jacol84 Active Member

    SS hunting.jpg

    Nice stuff, guys. Brian, I'm not sure your stirrup dampers are in the best spot to get the most "quietening".;)
     
    Mathew57, meathead, Long Gone and 3 others like this.
  8. robertyb

    robertyb Member

    My blackout M330 with TT trigger and ADF

    0201151000_zps4ibouzhb.jpg
     
  9. xcaliber

    xcaliber Active Member

    Micro, and Matrix in the stand, and a downed buck with my Vortex. Micro in the Stand 11-14.jpg Trixxi with Copperhead.jpg 8 pointer 1.jpg
     
  10. Snuffbox

    Snuffbox New Member

    imagejpg1.jpg
    My cut down shorty 3d shooter
    It's about 150lb matrix with Triggertech 1.5 ,crossbones ,Aging stock and xcaliber string
     
  11. Long Gone

    Long Gone Active Member

    Some snazzy looking rigs, gents! Keep 'em comin'... :)
     
  12. xcaliber

    xcaliber Active Member

    Here are a few more, the Brute "X" Black Riser / Camo Limbs, and the blood letting from the Vortex!

    Brute 1.jpg Better 1.jpg
     
    Mathew57, meathead and ehntr like this.
  13. ehntr

    ehntr Member

  14. DeerBoy_NC

    DeerBoy_NC Member

    Y'all saw this before. My Micro Nightmare with camo and 3 color string that matches 3 color fletchings.
    photo1-6.jpg

    photo3-2.jpg
     
  15. D. B. Scherz

    D. B. Scherz Member

    I meant to ask, Did you remove the barrel from the stock to apply the game-skin?


    Sent from my iPad using Tapatalk
     
  16. DeerBoy_NC

    DeerBoy_NC Member

    DB, yeah, I took the stock off and also took the riser off. The rail was a tight fit going back in. I used some lube to help that. Also, my riser fit very tightly to the rail, so I had to trim the material so as to not impeded that fit. This material is very thin, but still it was enough to tighten things up.
     
  17. xcaliber

    xcaliber Active Member

    2 crossbows 2.jpg Here are the sisters, Ibex & Vortex, Roxanne, and Evileen.
     
    Mathew57, wildcatter and ehntr like this.
  18. amythntr

    amythntr Guest

    crossbones_zps752e7087.jpg crossbones_zps752e7087.jpg micro_zps2bd83612.jpg Nightmare_zpsf2da5b94.jpg ShrinkWrap_zps6c0c2597.jpg crossbones_zps752e7087.jpg micro_zps2bd83612.jpg Nightmare_zpsf2da5b94.jpg ShrinkWrap_zps6c0c2597.jpg

    Meet " Bada Bing"....my Nightmare 335:cool:
     
  19. Brubaker

    Brubaker Member

    Agreed! Good stuff.
     
  20. bbahunter

    bbahunter Active Member

    Yeah I know Jeff ;):D
     

Share This Page